point of load power supply Installation Notes

Web Design And Seo For www.china-webdesign.com

drive pins - China Manufacturer

Thank you for inquiry my drive pins, Tel:0086-574-6356 1872, Email:aviva@bebon-fastener.com

http://www.bebon-fastener.com/drive-pin/

1, drilling depth: expansion tube length concrete construction information, but I found that this is not deep enough, may hole residual debris, the expansion pipe length of about 5 mm deep the better. Left in the ground, as long as you are expansion pipe length, the length of the expansion bolt is equal to or less than the expansion pipe length is greater than or equal to.
Expansion bolts the requirements fixed on the ground, of course, the more the better, and it also depends on the object, the need to force fixed. Installed in the force strength concrete (C13-15) in five of brick.
Properly installed in concrete expansion bolts M6/8/10/12, most dissatisfied with the maximum static 120/170/320/510 kg.
178 point of load power supply
Anti-theft screws step by step installation
What is the method of installation of anti-theft screws? In fact, the installation method of the anti-theft screws with ordinary screws, the method is substantially the same is not particularly complex.
According to the Vehicle Administration staff, on behalf of the markers in the province unified screws, nuts, bolts, base and buckle cap and municipalities referred to as Chinese characters and letters.
Very easy to install anti-theft screws, tools only need pliers and a screwdriver. First bolt mounting base, the license plate of the back of the base, high and low temperature, a pair of pliers, 10 "flat-blade screwdriver tighten the nuts, bolts life, so the number plate fixed in the corresponding position.
Finally, the buckle cover cover bolt head, high and low temperature of the sealing device, the entire installation is complete.peak load power plant