Correct choice and use of sub-catchment analysis

Sub-catchment (including connectors) material should be copper. Direct contact with the PP-R PP-B connector for connecting PP-R pipe or PP-B pipe, copper surface must be nickel-plated.water filters cartridges

Sub-catchment (including connectors) apparent, the inner and outer surfaces should be smooth, does not allow cracks, blisters, cold shut folder residue, uneven and any impact on the performance of defects. Surface plating of the connecting member, the color should be uniform, solid coating, does not allow off plating defects.

◆ manifold can be divided into the road to control the heating temperature of each room or area, the user may need to adjust the room temperature

◆ manifold exhaust valve manually, the user can own line within the gas discharge to ensure that the heating temperature of the pipeline.

◆ trap on the front-end filters, regular or occasional lower end of the filter during the annual heating filter to remove installed after cleaning, to ensure clean water pipes. After the end of the heating, the application of water to flush pipe network.mesh filter bag

◆ If you are not at home for a long, total available water separator valve will adjust the cycle of water, do not all closed. If the room throughout the winter heating, the water inside the tube should be Chuijin.