The commissioning steps before the bag pulse dust collector is running

Pulse jet bag filter industrial wider application of a dust removal equipment, it is more advanced in cleaning technology. Deal with large amount of wind, small footprint, high purification efficiency, reliable operation, simple structure, small amount of maintenance features, its collection efficiency can reach more than 99% efficient dust removal equipment. Pulse jet bag filter is put into operation, the various components of the equipment needed for testing, debugging. The specific debugging steps:fabric filters

Step 1: Check the transmission part (ash body) of a foreign body, and then turn on the wind power switch, check the direction of rotation of the airlock, ranked ash auger runs smoothly without abnormal noise, to ensure the normal operation of the time by observing not less than 0.5 hours.

Step 2: Check the support of the process piping connection is stable solid, and check the filter bag installation is solid, has good sealing.

The third step: Make sure the power and air supply connections are correct on, open the pulse controller checked in order to verify the line of control and digital display connection order of the solenoid valve, confirm the solenoid valve according to the sequence of actions is correct.bag filter manufacturers

Step 4: observe the operation of the solenoid valve is sensitive and reliable switching sound is clear disorder phenomenon, the injection time of the pulse valve opening degree is consistent.

Step 5: Debug after the power is turned off, the gas source, close the control valve and check the security of the field devices. After some testing work is completed can be confirmed and put into use.